Our Products

1.            Glazed Stoneware (SW ) Pipe 100 mm             
2.            Glazed Stoneware (SW ) Pipe 150 mm
3.            Glazed Stoneware (SW ) Pipe 200 mm
4.            Glazed Stoneware (SW ) Pipe 250 mm
5.            Glazed Stoneware (SW ) Pipe 300 mm
6.            Glazed Stoneware (SW ) Pipe 350 mm
7.            Glazed Stoneware (SW ) Pipe 400 mm
8.            Glazed Stoneware (SW ) Pipe 450 mm
9.            Glazed Stoneware (SW ) Pipe 500 mm
10.          Glazed Stoneware (SW ) Pipe 600 m

GENERAL QUALITY  (AS PER CLAUSE 5 OF IS 651:2007)
1. All pipes and fittings shall be sound and free from visible defects which impair the strength, durability and serviceability. The glaze of pipes and fittings shall be free from crazing. The pipes and fitting shall give a sharp clear note when struck with a light hammer.
2. For pipes and fittings, a maximum of 10 percent shall be acceptable with any one of following blemishes which do not impair the strength, durability and serviceability provided these pipes and  fittings satisfactory pass the hydraulic test specified in 7.2:
                (a) A thin chipping not exceeding one quarter of the thickness of the body and not                              exceeding 10cm2 on the outside of spigot or on either side of the socket;
                (b) One blister, unbroken, not more than 3mm high not more than 40mm in largest                              dimension inside or outside of the pipe; and
                (c) Hairline surface cracks.